Titanium Alloy Rod

When the titanium alloy rod is made, it needs to be made according to a certain formula, and the technical requirements are very high and there should be no too much error. Titanium alloy is a super alloy composed of other elements based on titanium element. Titanium has two kinds of isomorphic crystals: Titanium is an allotrope with a melting point of 1668°C and a close-packed hexagonal lattice structure below 882°C, called α-titanium; it is body-centered cubic above 882°C. Character structure, called β-titanium. Using the different characteristics of the above two structures of titanium, adding appropriate alloying elements to gradually change the phase transformation temperature and component content to obtain titanium alloys with different structures. The GR5/Ti6AL4V titanium alloy rods produced by Shenghui have to undergo strict inspections, third-party inspection reports, and conform to ASTM and гост standards.

The Ti-6Al-4V alloy successfully developed by the United States in 1954 was the first practical titanium alloy. Due to its good heat resistance, strength, plasticity, toughness, formability, weldability, corrosion resistance and biocompatibility, titanium alloys are used in more and more fields and have become the flagship of the titanium alloy industry Alloy, the use of this alloy has accounted for 75% to 85% of all titanium alloys.

At present, there are hundreds of titanium alloys developed in the world, the most famous are Ti-6Al-4V, Ti-5Al-2.5Sn, Ti-2Al-2.5Zr, Ti-6242, Ti-10-5-3, Ti-1023, BT9, BT20, IMI829, IMI834Ti and other 20-30 alloys. -32Mo, Ti-Mo-Ni, Ti-Pd, SP-700, , etc. I believe there will be more fields in the future Titanium and titanium alloys are needed. As an enterprise specializing in the production and processing of titanium and titanium alloys, we will work harder to make titanium the best.

In order to ensure that titanium products have a certain reputation in the titanium industry, Shenghui conducts 100% strict inspection on the chemical composition, room temperature mechanical properties, dimensional deviation, appearance quality and surface condition of each batch of GR5 titanium alloy bars produced.

High work efficiency is due to our attention to details

We carefully do the craftsmanship of each GR5 titanium rod

We mainly produce titanium rods, titanium plates, titanium tubes, titanium parts, titanium flanges, titanium equipment and special-shaped parts, as well as non-ferrous metals such as tungsten, molybdenum, nickel, and niobium. We now have a large inventory. An independent competitive advantage of economies of scale has been formed on the production and sales network, and the products are exported to Europe, America, Japan, Korea, Malaysia and other countries. It has become one of the most dynamic titanium processing enterprises in Baoji Titanium Industry. We not only have huge hardware facilities, but also complete research and development capabilities.

http://www.sh-titanium.com/